Woodworking engraving machine recommendations

    About the woodworking engraving machine, it is now a very common machine in the engraving factory. Using this machine for woodworking engraving can make the engraving faster and increase its production rate. However, when using the engraving machine, sometimes it is often found that some faults occur. In fact, this is related to some operational requirements when using it.
    Here, it is recommended that the engraving factory use the engraving machine for a duration of six to seven hours. In fact, the current continuous working time of the engraving machine is ten hours, more than ten hours, it is easy for the machine to malfunction. For the life of the machine, it is best to control the usual duration of use within six to seven hours. After that, the machine needs to be cooled for a while before it can continue to be used.
    In addition to the need to pay attention to continuous use time, hesitant temperature and the working strength of the machine are different, you need to pay attention to the pump temperature of the machine. The pump should store enough cold water to cool the equipment. If it is found that the temperature of the water pump is already very high, which is not enough for cooling and cooling purposes, the woodworking machine manufacturer recommends stopping the machine immediately and cooling the machine to replace the water in the pump with cold water. Continue working. Otherwise, it is prone to security incidents.

What is the operational flow of the standard stone engraving machine?

    China's memory of traditional culture has gradually been integrated with electronic technology. For example, some techniques such as stone carving and carving are no longer all, and artificial sculpture is required. Instead, stone carving machines are used instead, because of each The pattern of the product is different, so the CNC engraving machine system on the market is also very complicated to operate, and the development of the entire intelligent panel is becoming more and more advanced.
    Under the guidance of no professional technicians, non-workers, remember not to operate in violation of regulations, must be in accordance with the standard stone engraving machine manufacturers, the use of the procedures specified in the text. First of all, you should check the network connection of the computer. If everything is connected properly, you can boot the system smoothly and jump to the interface of the CNC system. Then return the machine to the position of the machine origin. This button can be found in the menu and selected.
    Then, the processing of the program is carried out using the program of the product. Of course, it is generally necessary to download the software and the code of the processing program. Otherwise, if automatic processing is used, the related functions are invalid. As long as we operate according to the standard process, we can guarantee the realization of the whole project, on schedule, once the machine has any problems, or if you find any signs of violations in the operation mode, you should promptly give back and repair. To avoid causing greater losses to the project.