How to judge the quality of materials used in stone engraving machines
Stone engraving machines can't be distinguished even if they look at the machine on site, but most customers don't know about stone engraving machines. This requires you to know the power of the spindle of the carving machine to the seller. The power of the motor used is driven by a cheap driver board. It is still a safe and stable drive.
The amount of cutting is not only an important parameter that needs to be determined before the machine is adjusted. Achieve high yields and low processing interest for cutting. And its reasonable value has a very important impact on processing quality, processing power, and interest on production. The so-called "reasonable cutting amount refers to the premise of making full use of the cutting function of the tool and the power function (power, torque) of the machine to ensure the quality.
To ensure that at least one pass is completed. Tool life should be determined by part accuracy and surface roughness. Carpenter carving machine is compared with the usual machine tool processing method, when large parts are finished. Avoid changing the knife halfway during cutting. The engraving machine has put forward higher requirements for the tool, not only the steel is good, the precision is high, and the demand scale is stable, the durability is high, and the equipment of the broken and row function is needed to adjust the equipment conveniently, so as to satisfy the high power requirement of the CNC machine tool. .
The stone engraving machine programmer must determine the amount of cutting for each process. Different cutting amounts are required for the demand. The selection principle of cutting amount is to ensure the machining precision and surface roughness of the parts. The tools selected for CNC machine tools often use tool materials that are used for high-speed cutting (such as high-speed steel, ultra-fine-grained hard alloy) and use indexable inserts. When programming CNC. And write the program in the form of instructions. The cutting amount includes the spindle speed, the amount of backfeed and the feed rate. About different processing methods. Give full play to the tool cutting function, ensure reasonable tool durability, and give full play to the functions of the machine tool, maximizing the ultimate productivity and reducing interest.
The primary standard of wood carving machine accessories should be accustomed to the general scale of the carpenter's machining of the workpiece. That is, small workpieces should be machined with small standards. Make the rational use of equipment. Large workpieces are selected for large standard machine tools.
A three-dimensional carving machine company has shown that sandstone relief can summarize the technical advantages of sculpture and painting. The perspective reduction in the two-dimensional space, the layout of the carpenter's machine tool depends on the influence of the machine's standard scale, the weight of the workpiece. Carving and depicting on the plane. Adhere to diversity and diversity. The set description or virtuality of the main image makes the description of the sandstone relief more powerful than other sculptures, especially round sculptures, together with the typical representation of the sculpture. Knowing the carpenter carving machine, how to buy laser engraving machine, the internal structure of the carving machine produced by various manufacturers is basically the same, but the quality of the machine coming out is very different. At this time, you will need a pair of "fire eyes" to see the quality of the carving machine, the quality of the accessories used.
