Customers who purchase CNC carpenter engraving machines know that when the manufacturer commissions the engraving machine, it is required to give the engraving machine manufacturers relevant parameters and other data after purchasing the engraving machine. So, what is the carpenter engraving machine parameter? What is the effect of debugging the carpenter engraving machine parameters?
Let's debug the carpenter engraving machine requirements to correct the system parameters and manufacturer parameters according to the machine type. Let's take a brief look at the detailed meaning of these parameters:
• Free-speed speed: Some of the speeds refer to the speed of the engraving machine when it is running, that is, the speed of the specification code G00 command;
• Processing speed: The normal processing speed of the carpenter engraving machine is the interpolation speed of the machining instructions such as the specification codes G01, G02, G03.
These two values control the speed at which the active method moves. If the machining program in the active mode, or perhaps the MDI command, does not specify a speed, it moves at the speed set here.
• Use default speed: Whether to discard the speed specified in the machining program, use the system default speed set above.
• Use default speed: Indicates whether the system discards the spindle speed specified in the machining program and uses the default system speed set by the system.
• Speed adaptive optimization: Whether the system is optimized according to the connection characteristics of the machined workpiece.
• IJK incremental form: Whether the center programming (IJK) is incremental, and the IJK value used by some post-processing programs for arc programming is an incremental value.
• Use Z down knife speed: Select whether to use a specific speed drop speed when moving straight down in the Z direction.
• Optimize the Z-direction knife speed: When moving in the Z-direction straight direction, use the G00 speed knife.
• The idle (G00) command uses a fixed feedrate override of 100%: This parameter is an option. Indicates whether the system neglects the influence of the feed rate when executing the lost motion command. Thus, when the magnification is changed, the speed of the lost motion is not affected.
• Actively abort the spindle when the pause is complete (requires restart): Set whether to actively suspend the spindle scrolling after a machining program has been paused or finished.
• X-axis mirroring: Set the X-axis for mirroring.
• Y-axis mirror: Set the Y-axis for mirroring.
Shunhuan CNC Tips: These parameters of the CNC Carpenter Engraving Machine are not intact. We can adjust some parameters according to the actual situation or according to our own habits. But the premise is that, if you are not familiar with the CNC carpenter engraving machine operator, it is best to carefully debug the parameters of the CNC carpenter engraving machine.
