About the woodworking engraving machine, it is now a very common machine in the engraving factory. Using this machine for woodworking engraving can make the engraving faster and increase its production rate. However, when using the engraving machine, sometimes it is often found that some faults occur. In fact, this is related to some operational requirements when using it.
Here, it is recommended that the engraving factory use the engraving machine for a duration of six to seven hours. In fact, the current continuous working time of the engraving machine is ten hours, more than ten hours, it is easy for the machine to malfunction. For the life of the machine, it is best to control the usual duration of use within six to seven hours. After that, the machine needs to be cooled for a while before it can continue to be used.
In addition to the need to pay attention to continuous use time, hesitant temperature and the working strength of the machine are different, you need to pay attention to the pump temperature of the machine. The pump should store enough cold water to cool the equipment. If it is found that the temperature of the water pump is already very high, which is not enough for cooling and cooling purposes, the woodworking machine manufacturer recommends stopping the machine immediately and cooling the machine to replace the water in the pump with cold water. Continue working. Otherwise, it is prone to security incidents.
