Loss factor for the use of INA bearings
Bearings have been widely used in many fields. Understanding the causes of INA bearing losses is important for our use of bearings.
The use factors of the loss INA bearing mainly refer to whether the installation adjustment, the use and maintenance, the maintenance and repair, etc. meet the technical requirements. The installation condition is one of the primary factors in the use factor. The bearing is often changed due to improper installation, and the force state between the parts of the whole bearing changes, and the bearing runs and loses under abnormal conditions. According to the technical requirements for the installation, use, maintenance and maintenance of plastic bearings, monitor and check the load, speed, working temperature, vibration, noise and lubrication conditions of the bearing in operation, find the cause and find the cause immediately, and make adjustments. It returned to normal.
Rolling bearings are classified by size
Imported bearings are classified according to their outer diameter size:
Miniature bearings - bearings with a nominal outside diameter range of 26 mm or less.
Small bearings - bearings with a nominal outside diameter range of 28-55 mm.
Small and medium-sized bearings – bearings with a nominal outside diameter range of 60-115 mm.
Medium and large bearings - bearings with a nominal outside diameter range of 120-190mm.
Large bearings - imported bearings with a nominal outside diameter range of 200-430mm.
Extra large bearings - bearings with a nominal outside diameter range of 440 mm or more.
订阅：
评论 (Atom)